- 4 -
2.2
DMX Connection Method
If the lighting working on DMX mode it needs be connected to the DMX controller
For example: if using DMX 8 channels mode, the first DMX address value must be 1st, next device
should be plugs 8 (e.g., 1,9,17,25...).
Every DMX address can be reused as needed.
DMX address can be any data between 001 and 512.
Note: 1. As this fixture's DMX signal cable connection is Parallel
connection,
please don’t more than 32 units.
2. If the signal cable is over 300m between the DMX512 controller
And fixture or between two fixtures, then a DMX signal amplifier
is needed.
