Wireless Waterproof Remote RGB LED Controller
RGB LED Controller, On/Off, Color and Dynamic Modes
WIFI-CON
User Manual
Part Number:
Important: Read all instructions prior to installation.
RCW-RFRGB
Remote: RCW-RFR
Parts Included
Diagram 1
Diagram 2
Remote Buttons
1 - RF Controller
1 - Key Fob Remote
Remote comes paired to the controller. Use the following Procedure if additional
remotes are required.On power up, LEDs will be green indicating pairing mode for three
seconds. During green pairing mode, press button “A” then “B” to pair a new remote.
4400 Earth City Expy, St. Louis, MO 63045
866-590-3533 superbrightleds.com
Specifications
Wiring
Remote Pairing
Model Number
RCW-RFRGB
Input Voltage
9~14.5 VDC
Output Current
3 x 1.3A Maximum
Fuse Size
3A
Operating Temperature
-4 ~149° F (-20~65° C)
IP Rating
Waterproof IP67
Static Color Dynamic Modes
2
Seven Color Dynamic Modes
2
Static Colors
18
Override Mode
1
Brightness Levels
5
Remote Battery
12V 27A x 1
Remote Range
33 Feet (10m) Maximum
Remote Frequency
315 MHz
FCC ID
2AFXS-JX-R001
Button
Functions
Cycles up through 18 single color modes and two 7 color modes.
Press and hold for dimming 80%, 60%, 40%, 20% and back to
100% during single color modes.
Activates Flash Modes during single color modes. Switches
between Flash/Flash/Long Pause and Flash/Flash/Short Pause
during flash modes. Increases cycle speed during 7 color modes
Activates Fading Mode during single color modes. Decreases
cycle speed during 7 color modes.
On/Off
Hold for 6 seconds to return to Mode 1 (Static Red)
Output Connector
Polarity
Purpose
Black
Positive (+)
Common Anode (+)
Red
Negative (-)
Red Cathode (-)
Green
Negative (-)
Green Cathode (-)
Blue
Negative (-)
Blue Cathode (-)
Input Wires
Polarity
Purpose
Black
Negative (-)
Ground In (-)
Red
Positive (+)
9~14.5 VDC Power In (+)
Blue*
Positive (+)
9~14.5 VDC Red Override Signal In (+)
*Blue wire activates red single color mode at full brightness while voltage is applied. Use for
brake override if required. Works as brake override even when controller is in standby mode.
Fuse Panel
MFCT: Mini Fuse
Circuit Tap
(not included)
Ground (-)
White
Antenna
Black
Ground
Red
Power In
Blue
Brake
Override
To Brake
Switch
RGB LED Strip
(not included)
LC4 Connector
RF Controller
RCW-RFRGB
RCW-RFRGB
Black
Ground
Red
Power In
Blue
Wire
RGB LED Strip
(not included)
LC4 Connector
RF Controller
Running Light Cicuit (+)
Ground
G
R
B
G
R
B
G
R
B
G
R
B
White
Antenna
PSC-164
Brake Light
Circuit (+)
G
R
B
G
R
B
G
R
B
G
R
B
1 - Inline Fuse Holder
1 - 3A Fuse
RCW-RFRGB
