WIFI-CON
User Manual
Part Number:
Important: Read all instructions prior to installation.
4400 Earth City Expy, St. Louis, MO 63045
866-590-3533 superbrightleds.com
Mode Sequence & Functions
Mode
Button A
Button B
Button C
Button D
1
Red
Flash Modes
Fade Mode
On/Off
2
Blue
Flash Modes
Fade Mode
On/Off
3
Light Pink
Flash Modes
Fade Mode
On/Off
4
Green
Flash Modes
Fade Mode
On/Off
5
Gold
Flash Modes
Fade Mode
On/Off
6
Light Blue
Flash Modes
Fade Mode
On/Off
7
Orange
Flash Modes
Fade Mode
On/Off
8
Hot Pink
Flash Modes
Fade Mode
On/Off
9
Light Green
Flash Modes
Fade Mode
On/Off
10
Cool White
Flash Modes
Fade Mode
On/Off
11
Aqua
Flash Modes
Fade Mode
On/Off
12
Pale Rose
Flash Modes
Fade Mode
On/Off
13
Purple
Flash Modes
Fade Mode
On/Off
14
White
Flash Modes
Fade Mode
On/Off
15
Warm White
Flash Modes
Fade Mode
On/Off
16
Sky Blue
Flash Modes
Fade Mode
On/Off
17
Sea Green
Flash Modes
Fade Mode
On/Off
18
Lemon
Flash Modes
Fade Mode
On/Off
19
7 Color Flash
Speed Up
Speed Down
On/Off
20
7 Color Fade
Speed Up
Speed Down
On/Off
RCW-RFRGB
Remote: RCW-RFR
FCC Statement
Auxilary Running/Brake Light Example
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications in construction of this device which are not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
Tip: To use RGB LED light strips for auxilary
running lights/brake lights, set controller for
red color and dim to desired brightness. Attach
Blue wire from controller to the positive brake
light wire on the motorcycle. After pairing
mode the LED light strips will be dim red when
controller is on and the LED light strips will
be full brightness red when brake is applied.
Controller will activate full brightness red
mode anytime the controller is powered and a
positive signal is applied to the blue wire.
White
Antenna
Black
Ground
Red
Power In
Blue
Brake
Override
To Brake
Switch
RGB LED Strip
(not included)
LC4 Connector
RF Controller
RCW-RFRGB
RCW-RFRGB
Black
Ground
Red
Power In
Blue
Wire
RGB LED Strip
(not included)
LC4 Connector
RF Controller
Running Light Cicuit (+)
Ground
G
R
B
G
R
B
G
R
B
G
R
B
White
Antenna
PSC-164
Brake Light
Circuit (+)
G
R
B
G
R
B
G
R
B
G
R
B
