Troubleshooting
• No image or noise in image
- Check whether the probe is connected to the
handle correctly or reconnect the probe
- Check the battery polarity to make sure it’s correct.
- If batteries are exhausted, replace the batteries
• LED lights are dim or blink
- Batteries are low
• Shut down the device and turn on again when it’s not
functioning normally
• Forgot password
- Use a pin to press the reset key for 7 seconds to
reset the settings of the device. The default
password is 00000000
If you have two or more WiScope Wi-Fi Inspection
Cameras and want to use them at the same time, you need
to make sure that all the devices have different SSIDs,
otherwise you’ll need to change them manually.
11
<- Record video
<- Gallery
<- Settings
Summary of Contents for WiScope WS100
Page 2: ......
