FRONT WHEEL REMOVAL (OPTIONAL)
To reduce weight when lifting the scooter
The front wheels of the scooter can be quickly removed when it is in the
folded position by pushing the release pin “J” and pull front wheels out
as per the illustration. This will reduce the weight by approximately 2 kg
Reassemble in the reverse order.
NOTE: Double check that the shaft "K" is locked in position
before unfolding the frame and using the scooter.
- 21 –
PRECAUTION
●
When using your scooter for the first time you should practice at slow
speed in a flat open area free of obstacles until you are confident in
turning, stopping, reversing and judging braking distance.
●
This scooter is designed for a maximum rider weight of 80 kgs.
●
Always switch power “OFF” (Key switch to “OFF” position) before
leaving your scooter.
●
Do not store your scooter outside without adequate protection.
●
Keep the shipping carton in dry place after unpacking your
SupaScoota in case it needs to be shipped for service.
●
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given instructions
concerning use of the appliance by a person responsible for their
safety. Children should be supervised to ensure that they do not play
with the appliance.
Your SupaScoota is extremely maneuverable but sharp turns must only
be done at very slow speed.
●
Do not operate the Forward/Reverse switch while moving. This could
damage your SupaScoota.
Avoid power spray water washing of the scooter as this could cause
damage to the wire connectors and electronic system.
Completely dry off the scooter, if necessary using a dry cloth after
cleaning your scooter.
- 22 -
