Notice d'utilisation parachute
| FLUID
LIGHT
SUPAIR
|
FLUID
LIGHT
| page 13
Connecting Tandem reserve parachute
First of all, take care that your reserve is compatible with the harness you want to use with. In case you will use protection accessories (Bumpair, airbag), it must be installed in
the harness first, then check that your rescue fits well in the reserve container, without too much space or compression.
You will need :
-1 x Tandem «Y» Dyneema® risers ( Réf.: ELESBIY )
- 3 x 7mm square Maillon Rapide® ( Réf.: MAILCARIN7 )
- 4 x «O» toric rings ( Réf.: MPPP044 )
>> «Y» tandem riser - reserve parachute connection.
>> «Y» Tandem risers direction :
Reserve connection
Spreader bars
connection
- Open the Maillon
Rapide®
- Push the maillon
through the flexible
toric ring.
- Twist
- Give a second twist to
the toric ring.
- Push the Maillon
Rapide® through the
riser loop.
- Push the short riser’s
loop through the flexible
toric ring.
- Push the maillon
through the riser’s loop.
Repeat sequence 1
through 5 with the
upper side of the «Y»
tandem risers.
- Give a slide to the
riser towards the other
side of the Maillon
Rapide®
1
2
3
4
5
-
Tidy up the assembly.
- Be certain that the risers end loops are
securely in place.
- Close the maillon tightly by hand.
- Complete tightening with pliers by making
a ¼ tightening turn.
6
