16
RS
RS
8
9
10
Push the handle’s yellow cable ( rear section ) through the
elasticated line and delicately remove the cord.
Close the Cordura flaps over the cable and push them through
to the pocket’s top lid .
Fold the Cordura flap over the handle and insert it under-
neath the handle’s flap to fasten it to the velcros.
Upon setup completion, conduct an
extraction sequence during a hang-test to
verify that all works properly before dupli-
cating the installation procedure again...
5
6
7
Stow away the yellow cable’s end piece in its protective sleeve.
Push the end of the cord through the elasticated loop #4, then
guide it through the grommets #5 and #6
Pull the cord to guide the elasticated line through the grom-
mets.