Harness User’s manual
S
UP’AIR
_
RADICAL3
Page
20
Without twisting the risers, connect them to the harness attachment loops using the self-locking cara-
biners.
Check for the risers to be properly positioned and untwisted. The «A» risers must be located at the
front and facing the flight direction (see diagram).
Lastly, check for the main self-locking carabiners to be fully closed and locked in place.
>> Connecting the wing to the harness.
Connecting the wing to the harness
Install the accelerator by following the previous instruc-
tions.
Connect it to the wing using the split hooks.
Once the accelerator/speedbar is connected adjust its
length according to the wing recommended measure-
ments.
For correct use, there must not be any line tension at the
split hook level when the accelerator/speedbar line is
fully relaxed.
>> Installing the accelerator.
Self-locking
carabiners.
Harness
Flight direction.
« A » risers
left side.
