SUOMY C1GW000W3, Instructions For User

Page: 28 / 84

EN
USE AND MAINTENANCE
Do not under any circumstances use solvents, alcohol, benzenes, thinner or abrasive powder. These materials are
aggressive and may reduce the structural strength of the polycarbonate which could reduce its mechanical
properties.
All painted surfaces are subject to a natural alteration due to exposure to atmospherics; particularly some
colourings made with Fluo or UV paints could be subject to a faster migration phenomenon with a drop in
intensity. The phenomenon could be enhanced when the helmet is exposed for long periods to a particularly
intense light. Suomy therefore, cannot be held responsible for alterations of the painted surfaces due to wear
(effects of sunlight, vapours, detergents, crashes, scratches).
This does not jeopardize the performances and the quality of SUOMY GUN WIND.
Suomy denies all responsibility if this occurs.
LIFE
The helmet’s life depends on various factors that cause deterioration, including sudden temperature changes, the
degree to which it is exposed to sunlight and the intensity of us. Inspect the helmet regularly to check for any
damage! Cracks, detached parts, warping, flaking and changes in color are significant elements for verifying the
helmet’s state of deterioration; in any case we advise to replace the helmet after approximately 5 years because
over time its capacity for protection decreases due to the aging of the material. The manufacturing date is shown
on the inside of the helmet.
02_SUOMYSP_201512_Libretto GUNWIND_EN:Layout 1 21-12-2015 10:20 Pagina 28