RUN MODE
8
Setting the threshold value
٨
Refer to '
Comparative output 1/2 output
mode setting
' and '
Analog voltage output /
external input selection
' in '
9
MENU SET-
TING MODE
' for setting conditions.
9
Standard type
<RUN mode state>
<Setting condition 1>
Comparative output 1 output mode: '
' (EASY mode)
Comparative output 2 output mode: '
' (OFF)
DP-100
Since only the sub-display changes in the threshold setting, the following
shows only the sub-display.
Note: If the set pressure range is exceeded, '
' (exceeds the upper limit) or '
'
(exceeds the lower limit) will appear on the sub-display.
'
' will also appear if the Hi side threshold value exceeds the Lo side threshold
value when setting the ' hysteresis mode / window comparator mode ' threshold value.
<Setting condition 2>
Comparative output 1 output mode: '
' (EASY mode)
Comparative output 2 output mode: '
' (EASY mode)
<RUN mode state>
MODE
Automatic
Automatic
<Setting condition 4>
Comparative output 1 output mode: '
' (Hysteresis mode) or
'
' (Window comparator mode)
Comparative output 2 output mode: '
' (OFF)
<RUN mode state>
Automatic
Automatic
MODE
<Setting condition 6>
Comparative output 1 output mode: '
' (Hysteresis mode) or
'
' (Window comparator mode)
Comparative output 2 output mode: '
' (Hysteresis mode) or
'
' (Window comparator mode)
<RUN mode state>
Automatic
Automatic
Automatic
Automatic
MODE
MODE
MODE
MODE
<Setting condition 5>
Comparative output 1 output mode: '
' (Hysteresis mode) or
'
' (Window comparator mode)
Comparative output 2 output mode: '
' (EASY mode)
<RUN mode state>
Automatic
Automatic
Automatic
MODE
MODE
MODE
<Setting condition 3>
Comparative output 1 output mode: '
' (EASY mode)
Comparative output 2 output mode: '
' (Hysteresis mode) or
'
' (Window comparator mode)
<RUN mode state>
Automatic
Automatic
Automatic
MODE
MODE
MODE
SETTING
7
<Setting procedures>
RUN MODE
This is the pressure detection state.
Refer to '
RUN MODE
'.
8
MENU SETTING MODE
This is the setting mode for simple
setting.
Refer to '
MENU SETTING MODE
'.
9
PRO MODE
This is the setting mode for
detailed setting.
Refer to '
PRO MODE
'.
10
Press for 2 sec.
MODE
Press for 4 sec.
(Note)
MODE
Note: Although the menu setting mode appears two seconds after the mode selection
key is pressed, keep pressing the key.
OUTPUT MODE AND OUTPUT OPERATION
6
Notes:1)
2
Hysteresis can be fixed in 8 steps.
Refer to <
Hysteresis fixed value selection
> in '
PRO MODE
' for setting.
'
' is displayed for comparative output 1 and '
' for comparative output 2
on the sub-display .
10
٨
ON / OFF of the comparative output is controlled in this mode.
EASY mode
H (Hysteresis)
H
㧦
Hysteresis fixed (Note 1)
P
0
ON
OFF
Comparative
output
Pressure
٨
The EASY mode, hysteresis mode or window comparator mode can be
selected as the output mode for comparative output 1 and comparative
output 2.
Refer to '
Comparative output 1/2 output mode setting
' in '
9
MENU
SETTING MODE
' for details.
9
٨
The comparative output ON / OFF state can be controlled with randomly
set hysteresis in this mode.
Hysteresis mode
Lo
Hi
0
ON
OFF
Comparative
output
H (Hysteresis)
Pressure
H: 1 digit or more
2 digits or more when
using psi unit
Note: '
' or '
' is displayed for comparative output 1 and '
' or '
' for
comparative output 2 on the sub-display.
٨
In this mode, the ON or OFF state of the comparative output is controlled
with a pressure in the set range.
Window comparator mode
10
Notes:1)
2
Hysteresis can be fixed in 8 steps.
Refer to
< Hysteresis fixed value selection>
in '
PRO MODE
' for setting.
'
' or '
' is displayed for comparative output 1 and '
' or '
' for
comparative output 2 on the sub-display.
H (Hysteresis)
H
㧦
Hysteresis fixed (Note 1)
H (Hysteresis)
Comparative
output
Pressure
Lo
Hi
0
ON
OFF
