21
pressure is low or coiling water temperature is high); and the buzzer warning ; after 30seconds
engine stops working.
11 — Cooling Water temperature indicator
This indicates the engine cooling water temperature. The pointer is within green range when the
water temperature is normal; if it goes into the red range, it means water temperature is too high;
the LCD will flicker with buzzer alarming.
12 — Sound cancel button
When the monitor warning up, pressing this button can stop the sound of buzzer alarming.
13 — High speed traveling control button
Press this button, the machine will travel at high speed; press the button again, it will travel at
low speed.
14 —Working Light control button
Press this button, the working light comes up.
15 — Screen switch button
Press this button, the screen will show the working hour and speed; press the button again, it will
show the time.
16
—
Fuel level indicator
This indicates the fuel level. The pointer is within green range when the fuel level is normal; if it
goes into the red range, it means fuel in tank is lower than 10%; the LCD will flicker with buzzer
alarming.
17
—
Excavator monitor
Other parts of this monitor.
18
—
Fuel level warning indicator
If the fuel level is normal, green lamp comes on; if red lamp comes on and LCD flicker, that
means only litter fuel in tank, it should check and fill fuel.
19—Cooling water temperature warning indicator
When the water temperature is normal, there’s no display, the signal lights up when the
temperature is high(about 105 degree), the buzzer warns and the screen shows “Cooling water
temperature is too high” at the same time.
Summary of Contents for SWE20F 2019
Page 101: ...99 8 ATTACHMENT 8 1 20FNELECTRIC DRAWING...
Page 102: ...100 8 2 20FHYDRAULIC DRAWING...
