6
Copyright © 2012 Suntrap Pty Ltd All rights reserved ABN 87 117 052 856
Left blank for Installer’s Notes:
Collector bracket to Rail fitting – Between Solar Collectors (detail)
Collector
Collecto
r
Mounting Rail
(Part of Frame)
Space for coupling
Cut down collector bracket
Full size collector bracket
Spring Clamps
Collector mounting nuts and bolts
Thin edge to outside
Thin edge to outside
Vertical slot
Vertical slot
Horizontal slot
Horizontal slot
Spring Clamp Bolt and washer
Spring Clamp Bolt and washer
For 3 x solar collectors
(Sol-250ME-48: Sol-315ME-48: Sol-250NG26-48 / Sol-250LPG26-48: Sol-315NG26-48 / Sol-315LPG26-48)
Part/n – SET348
3 x complete Suntrap evacuated tube Solar Collectors, each with 16 x evacuated glass tubes
Part/n – SSF003
2 x sections of galvanised steel for Roof Frame (top, bottom and 4 x stainless steel straps)
Part/n – MOU003
12 x brackets. 12 x spring clamps, bolts and washers to connect the brackets to the Roof Frame. 12 x nuts
and bolts to connect the brackets to the solar collectors. 4 x screws for attaching the stainless steel straps
to the Roof Frame. 8 x long roof screws for attaching stainless steel straps to the roof rafters.
Part/n – FCS003
2 x couplings used to connect the solar collectors together (points M and N).
FCS003 – Coupling components used to
Connect the 3 x Solar Collectors together
MOU003 – Bracket arrangement
Solar Collector
Solar Collector
Cut
down
brackets
4 x Cut down brackets
Note: The Cut down brackets are only used between the collectors (one at the top and
one at the bottom to minimise the distance between the collectors for couplings FCS003)
