5
Copyright © 2012 Suntrap Pty Ltd All rights reserved ABN 87 117 052 856
For 2 x solar collectors
(Sol-250ME-32: Sol-315ME-32: Sol-250NG26-32 / Sol-250LPG26-32: Sol-315NG26-32 / Sol-315LPG26-35)
Part/n – SET232
2 x complete Suntrap evacuated tube Solar Collectors, each with 16 x evacuated glass tubes
Part/n – SSF002
2 x sections of galvanised steel for Roof Frame (top, bottom and 4 x stainless steel straps)
Part/n – MOU002
8 x brackets. 8 x spring clamps, bolts and washers to connect the brackets to the Roof Frame, 8 x nuts
and bolts to connect the brackets to the solar collectors. 4 x screws for attaching the stainless steel straps
to the Roof Frame. 8 x long roof screws for attaching stainless steel straps to the roof rafters.
Part/n – FCS002
1x coupling used to connect the solar collectors together (point N).
FCS002 – Coupling components used
to connect 2 x Solar Collectors together
MOU002 – Bracket arrangement
Solar Collector
Solar Collector
Cut
down
brackets
2 x Cut down brackets
Note: The Cut down brackets are only used between the collectors (one at the top and
one at the bottom to minimise the distance between the collectors for coupling FCS002)
Mains water supply:
The system is fitted with a water pressure limiting valve (connected to the DuoValve at point C). This ensures that the tank is never
under excess pressure. The valve is rated at 500 kpa and must never be changed for a higher rating.
Installation of the Solar Hot Water Tank and Solar Collectors:
The Solar Hot water tank and the Solar Collectors are provided as part of the Suntrap Solar Hot water kit, and all components must
be installed, maintained and operated as per instructions otherwise all warranties are null and void.
3. Suntrap Solarius Solar Hot Water Kits - Parts Supplied
The Suntrap Solarius Solar Hot Water Kits:
All kit components must be used as per supplied. The kit of parts include sub-assemblies which must be fitted complete as supplied.
Suntrap Pty Ltd reserves the right to vary the kit contents and components at its discretion at any time.
There are 8 Suntrap Solarius Kits as follows:
(Please note that there are 16 glass evacuated tubes per solar collector.)
Roof space required for Solar collectors:
2 x solar collectors 2.4 meters wide x 1.8 meters high
3 x solar collectors 3.6 meters wide x 1.8 meters high
Electric Boost Models (All tanks with middle element identified as ME):
Sol-250ME-32: 250 litre solar hot water tank with 2 solar collectors and electric boost-
1620mm (h) x 620mm (dia)
Sol-315ME-32: 315 litre solar hot water tank with 2 solar collectors and electric boost-
1980mm (h) x 620mm (dia)
Sol-250ME-48: 250 litre solar hot water tank with 3 solar collectors and electric boost-
1620mm (h) x 620mm (dia)
Sol-315ME-48: 315 litre solar hot water tank with 3 solar collectors and electric boost-
1980mm (h) x 620mm (dia)
Gas Boost Models:
Sol-250NG26-32 / ST-250LPG26-32: 250 litre solar hot water tank with 2 solar collectors and gas boost-
1620mm (h) x 620mm (dia)
Sol-315NG26-32 / ST-315LPG26-32: 315 litre solar hot water tank with 2 solar collectors and gas boost-
1980mm (h) x 620mm (dia)
Sol-250NG26-48 / ST-250LPG26-48: 250 litre solar hot water tank with 3 solar collectors and gas boost-
1620mm (h) x 620mm (dia)
Sol-315NG26-48 / ST-315LPG26-48: 315 litre solar hot water tank with 3 solar collectors and gas boost-
1980mm (h) x 620mm (dia)
