6
1.4 Memory Card Selection
A memory card(Micro SD card) is required to operate the camera, when the camera
switch is at
“
TEST
”
and no memory card is used, the screen will display
“
no File
”
. The
memory card slot of camera has 32GB memory capacity. Before insert or remove the
memory card, the camera must be turned to
“
OFF
”
. Failing to do so may causes loss of
files or damage the pictures that already recorded in the memory card. When memory
card is full, the screen will indicate
“
Memory Full
”
, the following data shows an
approximate quantity of photos which can be recorded by the camera depending on the
memory card capacity.
►
T
he camera has not built-in memory, it only works if a memory card is inserted. Before
memory card inserted, please format the memory card to improve the battery life and
shutter speed.
► The camera max memory cards capacity is 32 GB, 64GB or higher memory card can’t
be recognized by camera.
► To avoid malfunctions, keep the memory card away from moisture and avoid strong
vibration, dust, heat sources and direct sunlight.
► Insert the memory card as indicated by the icon on the slot. don’t force the memory card
into the slot, or bend /twist the memory card.
► After transport, wait until the memory card has reached ambient temperature before you
use it for the first time.
► Major fluctuations in temperature or humidity can lead to condensation which could
cause an electrical short-circuit.
► When the memory card is full, it will automatically stop taking pictures and videos,
camera doesn’t support cycle recording.
► To insert a memory card into the memory card slot of the device, push it into the slot
until it clicks into place.
► To remove the memory card from the memory card slot of the device, press the
protruding edge of the memory card in a little way until it pops out, then remove the card.
