30
2. Try to set your camera up in an area where no heat resources are in the camera’s field
of view.
3. In some cases, set the camera near to water will make the camera take images with
no subject in them.
4. Try to aim the camera over ground.
5. Try to set camera on stable and immovable objects, i.e.: large trees.
6. At night, motion detector may detect beyond range of the IR illumination, reduce
distance setting by adjusting sensor sensitivity.
7. Rising sun or sunset can trigger sensor. Camera should be reoriented.
8. If person/animal moves quickly, it may move out of the camera’s field of view before
photo is taken. Move camera further back or redirect camera.
6.2 Camera Stops Taking Images
1. Please make sure that the memory card has enough memory storage. If the card is
full, camera will stop taking images.
2. Check batteries to make sure that alkaline, NIMH or lithium AA batteries left power is
enough for camera to work.
3. Make sure that the camera power switch is at the “On” position and not at the “Off” or
“Test” modes.
4. When MMS/SMTP function is on, there will be around 1minute interval for camera to
send out photo before camera take the next photo.
5. Please format the memory card when you first time to use it or change to use another
memory card.
6.3 Night Vision Flash Range Doesn’t Meet Expectation
1. 4pcs AA batteries is not able to support camera night vision ability, please install 8 pcs
AA batteries for better battery life.
