SunTech TAB2323GMQC, User Manual

Page: 7 / 93

ENGLISH
4
User guide
TAB2323GMQC
Battery management and charge
Before first use, please set the device's battery is fully charged. Just need to
connect the adaptor or USB interface, then you can charge. The first two times
charging please keep about 6 hours, after that you just need 4 hours to
charge.
Remark: This tablet using Built-in type polymer battery, Charge must be to
choose standard adaptor (Input: AC110~240V 50/60Hz Max.180MA.. Output:
DC9.0V/2.0A), this device without supply DC charging, USB interface can
charge,
Choose USB interface to charger. During the charging, the battery icon will
scroll. When finished charging, battery icon will become green and stop
rolling. In order to prolong the service life of the machine, suggest use out
battery power before charge it.
Remark: If you long time don’t to use this Tablet, in order to avoid power
consumption caused damage, Please charge/play the battery once a month.
After low battery shut down, connect DC adaptor, device will remind low
battery, charging, need to wait some time until the battery is enough power to
enter into main menu. Device charging should be in standby status for reach
normal charging time. Because with device and screen consumption, it may
cause longer charging time.
CONNECTION WITH PC
Use USB cable to connect device to PC, device will pop up the USB
connection window, clic Turn on USB storage to connect to PC Once
connected click on the USB icon that appears at the bottom right of the
screen: