Safety
Safety
Instruction
Instruction
1.Plug directly into a properly individual receptacle.
2.Set thermostat knb to scale 5. (When temperature
reaches set temperature, pilot lamp will be turned
off. It takes about 15-20min.)
3.After confirmed pilot lamp is turned off, put your
favorite ice-cream between breads for ice-sand,
close a lid.
4.Set timer 20-30 sec., after then, take it out.
※This plate is coated teflon, so-Never clean by hard
stuff.
※A life of Teflon plates depends on frequency or
conditions(the amount of sugar and oil) of using the
product, and these need re-coat Teflon at your cost.
・This product should not be cleaned with water.
It's very dangerous.
・Wipe off the product with a dry cloth and always
keep clean
.
・If the plates don't work sufficiently, contact with
your agency.
To change the plates is at your cost.
・A warranty should be retained carefully, it's writtn
a serial number of the product.
This warranty is valid only in Japan.
This warranty is invalid to use the product in other
countries.
・Should attach a warranty with the product when
you order the repair of the product under warranty
.
・This manual should be retained carefully for future
reference.
