9
2.
PROBLEM:
a.
The amount of heated air exiting the front of the portable heater is reduced.
SOLUTION:
Check the electrostatic filter to make sure it is free of dust and dirt. Also
check the front grill and rear air intake to make sure it is not being blocked by any kind of
debris.
3.
PROBLEM:
a.
The portable heater will not turn on.
SOLUTION:
First, test your outlet to make sure it has power. You can do this by plugging in
another appliance and turning the appliance on. Secondly, check the LED display to see if it is
flashing. If this is the case, press the POWER button to turn off the timer and resume normal
operation of the portable heater. Third, check the power switch to see if it is lighting up. If the outlet
does have power, the LED display is not flashing, or the power switch is not lighting up, then contact
the manufacture immediately for further troubleshooting.
4.
PROBLEM:
a.
The portable heater continues to operate even when the power switch is turned off.
SOLUTION: Do not
unplug. The portable heater has a fan that will continue to operate even when
the power switch is turned off. This fan continues to run in order to cool down the portable heater.
Once the fan stops running, you can then unplug the portable heater.
5.
PROBLEM:
a.
The control panel displays no temperature or timer.
SOLUTION:
First, check to make sure the power cord is not damaged, is plugged in, and the outlet
has power. Secondly, check to make sure the control panel is not damaged. If the control panel
display continues to be inoperable, contact the manufacture for furthering troubleshooting.
6.
PROBLEM:
a.
The control panel is displaying a temperature and timer, but the portable heater does not
operate.
SOLUTION:
The Signal Cable or other relevant plugs may have become disconnected. Please
contact the manufacture for further troubleshooting.
7.
PROBLEM:
a.
The heat emitter is functioning and the air outflow is working, but the temperature displayed
on the LED panel does not increase.
SOLUTION:
The temperature sensor may be damaged or has become disconnected. Please
contact the manufacture immediately for further troubleshooting.
