Doc. Title
ST3940 User Manual
Concerning:
Rev.
Date (dd-mm-yy)
Page of Pages
Features and how to configure ST3940
1.06
0
18-6-19
32 of 54
the device that the server has completed receiving all the
‘emergency reports’. And then, the device will stop sending
Emergency reports if it is in emergency state.
<Example>
[command] ST600CMD;0123456789;02;AckEmerg
[response] ST600CMD;Res;0123456789;309;AckEmerg
9-5. Requesting ICCID
Once this command is made, some interactions will be made between the server and the device as described in the
‘Meaning’ section
of the table as below.
Field
Mark
Value
Meaning
CMD_ID
“ReqICCID”
How to request ICCID (Integrated Circuit Card Identifier), which
is a sequence number that is displayed on SIM.
If device receives this command, it sends the server ICCID.
<Example>
[command]ST600CMD;0123456789;02;ReqICCID
[response] ST600CMD;Res;0123456789;309;ReqICCID;8982111412600301307
9-6. Requesting to send information about Device Version
Once this command is made, some interactions will be made between the server and the device as described in the
‘Meaning’ section
of the table as below.
Field
Mark
Value
Meaning
CMD_ID
“ReqVer”
Requesting information about version of the device
If the device receives this command, it reports to the server
about:
Model,
Buyer,
Protocol, and
Software(S/W) release version.
<Example>
[command] ST600CMD;100850000;02;ReqVer
