12
Insert batteries
Turn the remote control onto the back and pull out battery cover. Insert the batteries in accordance with the
instructions and polarity (+/-) of the batteries
.
-
Insert 2AAA / Alkaline type batteries into your remote control.
-
Change the batteries in the same way depicted above
.
Warning:
Please use the battery type indicated in this manual. Improper or incorrect use of batteries may cause corrosion or battery
leakage, which could cause personal injury or damage to property
.
Maintenance and care
Maintenance
Attention! Careful and regular maintenance of infrared heater is required to attain a long and efficient operation of your
appliance.
1. Check the cleanliness of the reflector and IR-filament at least once a month. If necessary, apply cleaning and
maintenance instructions.
2. The number of checks may be increased considering the amount of the dust in the environment.
3. Check the deformation of the reflector, wire and frame visually while cleaning the appliance. In case of any deformation,
consult a qualified technician.
4. Check the power cable and plug visually while cleaning the appliance. In case of any deformation, consult a qualified
technician.
5. It is recommended to change the reflector every 2 years for more efficient operation.
Cleaning
Attention! Regular and careful cleaning helps your heater operate for longer years and more efficiently.
1. Unplug your power cable for your safety before cleaning your appliance.
2. Take out the front grid wire through the inlets on the frame using a slotted screwdriver.
3. Make sure that the power is off for your safety. Power cable plug must be unplugged.
4. The reflector and filament must be cleaned with a soft cloth, a smooth brush or cool or dry air. The cloth may be damp but
never too wet and the cleaner should not include any chemical.
5. Refrain from using cleaning material likely to damage the reflector (cleanser etc.).
6. Insert the wire grid using a slotted screwdriver.
In case of complaint
•
You can claim the device within 24 months from date of purchase (receipt).
•
A free replacement or repair will be excluded from prior improper product handling.
•
Defects in wear parts, consumables, as well as cleaning, maintenance or replacement of said parts are therefore
with costs.
•
If you want to make a complaint, please bring the entire device in its original packaging and with proof of purchase
to your dealer. For a timely and convenient service register, visit our website
more.
•
Without a proof of purchase, generally there will be no repair or replacement.
•
In the event that the complaint case is analogous to our terms of service, all defects of the device or its
accessories due to material or manufacturing defects will be eliminated by repair or, at our discretion, replacing the
unit.
•
The damage of accessories does not automatically lead to a free exchange of the whole device. In these cases,
please contact your dealer. Glass breakage, or breakage of plastic parts are always to charge.
•
The dealer or repair service can perform the repair after the expiration of warranty against charge.
