3
1. INTRODUCTION
The Sunsynk Power-Maker Battery has a revolutionary design that allows it to be both
wall or rack mounted. It does not require additional components as it comes complete
with all accessories.
Featured on the front of the Power-Maker Battery is a blue strip which glows indicating
that the component is working correctly. Included within the unit are cells produced by
China’s top cell manufacturers, ANC.
Parameter
SSCLK3.1
SSCLK5.63
Remark
Rated Capacity
Typical
62Ah
115Ah
Standard discharge (0.2C
5
A) after the
standard voltage
Minimum
60Ah
110Ah
Cell Voltage
Nominal
Voltage
3.2V
3.2V
Mean Operation Voltage
Internal Impedance
≤0.65mΩ
≤0.65mΩ
Internal resistance measured at AC 1kHz
after the battery has 50% charge.
(This measurement requires new batteries
and is conducted within one week of shipment
with less than 5 cycles)
Dimension
Depth
24.5mm
24.5mm
Initial dimension.
Width
140.5mm
140.5mm
Height
160.5mm
160.5mm
Rapid charge
based on cell
voltages
Constant
Current
110A
110A
Charge time: Approx. 1.5h@≥10°C
Constant
Voltage
3.65V
3.65V
Cut Off
0.01C
5
A
0.01C
5
A
Standard
discharge per cell
Constant
Current
12A
0.2C
Cut Off
Voltage
5V
Volumetric Specific Energy
295Wh/L
Approximately
Gravimetric Specific Energy
139Wh/kg
Approximately
Combination Method
110Ah
110Ah
Factory Voltage per Battery
Pack
51V (40%-60%)
Mean Operation Voltage
Cut Off Voltage per Battery
Pack
42V
Charging Voltage per Battery
Pack
54.75V
Internal Impedance per Battery
Pack
≤40mΩ
Internal resistance measured at AC 1kHz
after 50% charge. The measure must use the
new batteries within one week after shipment
and cycles less than 5 times.
Standard Charge
Constant
Current
20A
20A
Charge Time: Approx. 6h
Constant
Voltage
See Above
Cut Off
0.02CA
Maximum Continuous Charge
Current
60A
110A
When 0°C>T ≥-10°C