SunSynk SSCLK3.1 Quick Start Manual Download Page 14

14 

 

9.  APPROVALS AND CERTIFICATES 

 

9.1.  Long Time Storage 

If stored for a long time (do not use, exceed three months), the cell should be stored in a drying 
and  cooling  place.  The  cell’s  storage  voltage  should  be  45.0V-48.0V,  and  the  cell  is  to  be 
stored in a condition that the temperature of 23±2

 and the humidity 0f 45%- 75%. Long-term 

use of unused batteries to recharge every 3 months. Ensure that the battery voltage is within 
the above range. 
 

9.2.  Others 

Any matters that this specification does not cover should be conferred between the customer 
and Sunsynk. 
 
 

10.  WARRANTY 

 

10.1. Warrantor 

 

Warrantor  is 

Sunsynk  Ltd, 

located  at 

3-Floor,  Wai  Yip  Industrial  Building,  171  Wai  Yip 

Street, Kwun Tong, Kowloon, Hong Kong S.A.R.  

 

10.2. Products 

  
The following limited warranty terms and conditions (‘Factory Warranty’) apply exclusively to 

Sunsynk Ltd’s 

products of the following types (‘Covered Products’):  

 

SSCLK3.1 
SSCLK5.6 
 
Valid Date from:  
 
which: 

 

 

were manufactured by and bear the original manufacturing label of 

Sunsynk Ltd.  

 

were sold by 

Sunsynk Ltd 

directly or through a certified 

Sunsynk Ltd 

dealer (‘Authorised 

Dealer’) as new products in the world; 

 

were installed and commissioned by an Authorised, Certified Dealer in the world.  

 

10.3. Product Warranty 

 

For Covered Products, 

Sunsynk Ltd 

covers all defects in workmanship and materials during 

the  Warranty  Period  under  normal  application,  installation,  use  and  service  conditions  as 
specified  in 

Sunsynk  Ltd

standard  product  documentation,  and  subject  to  the  conditions 

listed  below  (‘Product  Warranty’).  The  Product  Warranty  is  not  intended  to  be  a  durability 
warranty, as end-user conditions and usage is variable. 

Sunsynk Ltd 

specifically disclaims 

any warranty to include specific components in any product or service.  

Summary of Contents for SSCLK3.1




















Reviews: