◦
Remove the old UV bulb and replace it with a new UV bulb.
◦
Replace the quartz glass ensuring the O-ring at the quartz base is present.
◦
Reattach the screw nut and screw, replace the item body.
Safety regulations
IMPORTANT!
•
Disconnect the mains electricity supply before attempting any installation/maintenance or
handling of any kind.
•
Only run the item fully submerged at all times.
•
The item should never be run dry as this will cause the unit to overheat and damage it per-
manently.
•
Do not attempt to modify this unit in any way, and only use the recommended parts for re-
placement.
•
All connections must be earthed.
•
Do not connect any voltage other than that stated.
•
Do not place the device in liquids other than water.
•
Do not use the water in water warmer than 30 .
℃
Explosion view and list of parts
© by WilTec Wildanger Technik GmbH
Item 50985, 50986
Page 4
http://www.WilTec.de
http://www.aoyue.eu
12 2020
-1
№
Name
1
Venturi outlet
2
Top cover
3
Media basket
4
Adjustable outlet
5
Impeller and shaft
6
Suction cups
7
Back plate
8
motor
9
UV bulb
10
Quartz tube
11
O-ring
12
Quartz screw nut
13
Screw
14
Filter body
15
Filter foam
16
Body cover
