4.
Filter Sponge
5.
Media Holder
6.
Cover
7.
Filter Body
8.
UV Bulb
9.
Filter to Glass Holder
10.
Motor
11.
Impeller
12.
O-ring #1
13.
Water Flow Dial
14.
O-ring #2
15.
Intake Tube
16.
Surface Skimmer
17.
Telescopic Tube
18.
Intake Cover
Instructions:
1.
Take out the filter from the packaging, wash the filter pads, carbons and ceramic balls.
2.
2. Put the telescopic tube and intake cover in to the intake tube.
3.
Put the filter pads, carbon, and ceramic balls into the filter body.
4.
Adjust the filter to glass holder so that the filter is leveled.
5.
Fill the filter body with tank water before usage.
6.
Adjust the water flow dial to limit the water intake.
7.
The dial on the side can adjust the intake for the surface skimmer. Please turn down the
surface skimmer if the surface skimmer is taking in too much air.
8.
UV sterilizer can be turned on and off if needed.
