SunSun 51649, Operation Manual

Page: 8 / 9

© by WilTec Wildanger Technik GmbH Item 51649, 51650 Page 8
http://www.WilTec.de
http://www.aoyue.eu 06 2021 -1
http://www.teichtip.de
Technical data
Model
Item №
Flow rate (
ℓ ⁄
h
)
UV power
(W)
Pump
power (W)
Suitable for aquari-
ums (
ℓ)
CBG-500 51649 500
5 5
38
–115
CBG-800 51650 800 75
–190
Troubleshooting
Problem Cause Solution
Dirty water Beneficial bacteria not established in the
new filter. Dose some bacteria into the filter and
tank.
Filter not of right size Upgrade to a larger filter.
Too many fish For reference only: 1 cm (1 inch) of fish
per litre (gallon) of tank water.
Dirty filter pads Clean the filter pads.
Dirty quartz tube Clean the quartz tube.
Water extremely dirty Change half of the water.
UV light not
on Filter not plugged in Plug filter to the power supply.
UV bulb burnt out Replace the UV bulb.
On/off switch on off position Push the switch to the on position.
No water
comes out
No water in filter body Put tank water in the filter body.
Filter not plugged in Plug the filter to the power supply.
Intake cover clogged Clean the intake cover.
Wearing parts
•
UV bulb (suggested changing after 8,000 hours of operation)
•
Filter pads and media
•
O-ring