SunSun 51649, Operation Manual

Page: 7 / 9

© by WilTec Wildanger Technik GmbH Item 51649, 51650 Page 7
http://www.WilTec.de
http://www.aoyue.eu 06 2021 -1
http://www.teichtip.de
5. Adjust the water flow dial to limit the water intake. The lateral regulator can adjust the intake for the
surface skimmer. Turn the suction rate if your surface skimmer sucks in too much air.
6. The UV sterilizer can be turn on and off if needed.
Maintenance and cleaning
1. Unplug the power plug, pour out the water.
2. Pull out the motor from the filter body.
3. Clean the impeller and change the UV bulb if necessary.
4. Take out the quartz tube, clean the surface.
5. Check if the quartz tube and the O-ring are in good condition. Change them if necessary.
6. Put everything back together.