Introduction
Thank you for purchasing this quality product.
To minimize the risk of injury we urge that our cli-
ents take some basic safety precautions when using this device. Please read the operation in-
structions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Safety instructions
CAUTION
:
On standing water, garden and swimming ponds and in their vicinity, the device may only be used with
a residual current circuit breaker with a rated current of up to 30 mA (according to VDE 0100 parts 702
and 738).
This device is not intended to be used by persons (including children) with limited physical, sensory or
mental capabilities or lack of experience and / or knowledge, unless they are supervised or obtained
from a person responsible for their safety her instructions on how to use the device.
Children should be supervised to ensure that they do not play with the device.
ATTENTION
:
•
Perform a visual inspection of the device before each use. Do not use the device if safety
devices are damaged or worn. Never override safety devices.
•
Only use the device in accordance with the intended use specified in these operating instruc-
tions.
•
You are responsible for the safety in the work area.
•
If the cable or the plug is damaged due to external influences, the cable must not be repaired!
It must be exchanged for a new one. This work may only be carried out by a qualified electri-
cian.
•
The voltage of 230 V AC specified on the nameplate of the device must correspond to the ex-
isting mains voltage.
•
Never lift, transport or fasten the device by the power cord.
•
Make sure that the electrical plug connections are in the flood-proof area or are protected from
moisture.
•
Pull the power plug before working on the device.
•
Avoid exposing the device to direct water jets.
•
The operator is responsible for compliance with location-specific safety and installation regula-
tions. If necessary, ask a qualified electrician.
•
The user must take appropriate measures to prevent consequential damage from flooding of
rooms in the event of malfunctions on the device (e. g. installation of an alarm system,
standby pump, etc.).
•
If the device fails, repairs may only be carried out by a qualified electrician.
•
The device must never run dry or be operated with the suction line fully closed. The manufac-
turer’s guarantee is void for damage to the device caused by running dry.
•
The device must not be used to operate swimming pools.
•
The device must not be installed in the drinking water circuit.
•
Set up the device so that it is not exposed to direct sunlight
•
Only operate the UV tube in a closed, unbroken housing.
WARNING
:
Read all safety warnings and instructions.
Failure to follow the safety instructions and instructions
could result in electric shock, fire and/or serious injury.
Keep all safety notices and instructions for future use.
© by WilTec Wildanger Technik GmbH
Item 50945–50947
Page 3
http://www.WilTec.de
http://www.aoyue.eu
12 2020
-1
