ii
• Questions? Call or Text +1 801-658-0015
USERS GUIDE
MICRO
™
Foreword
The original design and specifications for the Sunstone Micro E included optics LED lighting placed below
the optics. First generation Micro E units were outfitted with this configuration. However, a secondary design
included the use of a light ring with LED lights, as described in this supplement.
The following instructions replace those found in the user’s guide on page 15 with the header “LED lights.”
How to Attach the LED Light Ring
• In the Micro E shipping box, find the white box
labeled “LED-144W-ZK” and open. Inside you
will find the light ring, adapter ring, and power
cord.
• Remove the Adapter Ring (A) and screw it onto
the bottom of the microscope (B), as shown in
Figures 1 and 2.
Caution: Do not overtighten.
Figure 1. The Adaptor Ring screws onto the
bottom of the microscrope, providing a base to
which the light ring will attach.
Figure 2. Screw the Adaptor Ring (A) onto the
bottom of the microcscope (B).
B
A
