31
1. Unlock screen pop up
a. This dialog will appear if you try to change anything while in Lock Out
Mode. (This is an example on the alarms page but this will appear on any
page).
b. If you click the Toggle Lock Mode button while in lockout mode, it will
ask for your PIN again and will then unlock.
c. Press the “Go to Unlock Screen” to type in your PIN and unlock the welder.
d. Press the “Dismiss” button to go back to the previous screen.
Settings Screen
1. In this screen the user can modify interface settings and system
settings.
2. Interface settings tab
3. User can choose language (coming soon).
4. User can adjust the volume of the speaker for audible sounds.
5. User can adjust screen brightness on screen for different lighting
environments.
1. System Settings tab
a. In this screen users can modify and view system settings.
2. This button restores all weld settings defaults.
3. This button clears all memory including saved settings.
4. This button will update the unit through a USB flash drive.
5. This button will update the unit through Wi-Fi.
a. Unit has to be connected to a Wi-Fi connection with Internet access.
User will be prompted for this information.
6. This button will take user to a test suite screen.
a. Can only be accessed with a password, contact Sunstone Support if
this password is needed.
7. System information is displayed for support
1
5
7
6
4
3
2