SunStone Power SLPO48-100 User Manual Download Page 11

Sunstone Power Industrial GmbH

PT. Solid Power Energi Indonesia

Sunstone Power Industry Co., Ltd.

Nobelring 13, 60598 Frankfurt (M) Germany

Komplek Duta Indah Iconic, Blok. C No. 2 Jl.

1803A, Tiley Central Plaza. Shenzhen, China

www.sunstonepower.de

MH Thamrin KM.2 Kebon Nanas, Tangerang 15143 Indonesia 

www.sunstonepower.com

[email protected]

[email protected]

[email protected]

4. Unreasonable use of this of products may cause smoke, such as external short circuit, overcharging, 
and high ambient temperature. If smoke occurs, please cut off the power in time, use carbon dioxide 
or dry powder fire extinguisher for treatment, and bury it with sand or mud. The crowd must be evac-
uated in time during the entire process.
5. Unreasonable use of this series of products may cause the single battery to swell. In severe cases, 
it may cause the casing to rupture or crack. In these conditions, the battery should be stopped imme-
diately. Please contact our technical department or after-sales service department for further solution

.

6. It is forbidden to short circuit the positive and negative terminal of the battery directly, and avoid 
any metal or other conductive objects contacting the positive and negative terminal of the battery. 
This operation may cause personal injury or property damage

.

7. It is forbidden to immerse the battery in water or other conductive liquids. This operation may 
cause personal injury or property damage.
8. It is forbidden to use this product in series or parallel with other types of batteries. It is also forbid-
den to connect the whole system in series or parallel operation with other batteries. These operations 
may cause personal injury or property lose. If necessary, please contact the relevant technical depart-
ment to obtain the correct technical support.
9. It is forbidden to get wet under the environment of more than 95%RH, even immerse in water. 
Otherwise, it may cause internal short circuit, loss of function or abnormal chemical reaction, and 
cause fire, smoke, explosion and other accidents.
10. It is forbidden to put the battery system into fire or to be exposed to a high temperature environ-
ment exceeding the temperature conditions specified in this specification for a long time. These envi-
ronments above the safe temperature range will cause a significant decrease in the performance and 
life of this product, and even cause serious consequences such as combustion and explosion.
11. It is forbidden to store and use in an environment with high static electricity or high electromag-
netic radiation. Otherwise, the electronic devices in this product will be damaged, which may cause 
potential safety hazards.
12. Connect the positive and negative terminal of the battery system strictly in accordance with the 
instructions, and reverse charging is prohibited.
13. When the electrolyte leaks, avoid contacting the electrolyte with skin and eyes. In case of contact, 
wash the area with plenty of water and seek medical assistance. It is forbidden for any person or 
animal to swallow any part of the battery system or the substance contained in the battery system.
14. Protect the battery system as much as possible to avoid mechanical vibration, collision and pres-
sure shock, otherwise the battery system may short circuit, resulting in high temperature and fire.

Summary of Contents for SLPO48-100












Reviews: