Sunstech DTB-3500, User Manual

Page: 7 / 48

1
2 USB:
USB Jack, Support USB1.1.
3 REMOTE CONTROL SENSOR: Used to receive the signal from the remote control.
4 STANDBY INDICATOR: Used to visually show power state of the set top box, the green
LED will be light if turned on the set top box and the red LED will be light if the set top box
entered standby mode.
5 CHANNEL UP/DOWN: Used to change channels without using the remote control.
POWER BUTTON: Used to turn on/off the main power supply.
6 6
Front Panel and Rear Panel Illustration
1. Front panel
1 RF IN : This socket connects to your external aerial.
2 RF LOOP THROUGH: This socket will bypass the RF signal to either your TV or another
video system.
3 COAXIAL: This socket connects to a coaxial socket on your surround sound system.
4 VCR SCART: This socket connects to either a VCR or other video system.
5 TV SCART: This socket connects to TV.
6 MAINS CABLE: This is used to connect to main power supply.
C H A N N E L
AC100-240V~
50/60Hz
Serial No.: Serial No.:
DIGITAL TERRESTRIAL RECEIVER
POWER S UPPLY: AC100-240V~ 5 0/60Hz
MAX POWER CONSUMPTION: 10WATTS
MODEL:DTB-3500
Made in China
Coaxial Coaxial
Digital
Audio Digital
Audio
VCR O O VCR O O TV TV
IN IN R R F F
LOOP LOOP R R F F
THROUGH THROUGH