5
Working from the inside of the bench,
fasten the Body Fan Bracket to the
Body Fan Mounting Bracket with the
(2) 1/4-20 x 1/2” screws.
6
Tighten the screws holding
the endcap on and close
the bench acrylic.
4
Holding the Endcap and Body Fan together,
connect the Body Fan power cord to the cord
coming out of the end of the bench. Then, pull
the Body Fan almost out of the endcap as you
put the endcap in place and drop the Body Fan
into the Body Fan Mounting Bracket. Using the
screws removed from the old endcap, loosely
attach the new endcap to the bed. Start all four
screws in their holes only a few turns.
pg. 4
24735-02A
