45
4) RELATED PARAMETER
5) THREAD TRIMMING MODE SETTING
Make a sensor to detect by putting the initial end part of the sewing material to the front of
the sensor lamp before sewing. If the sensor does not detect the sewing material before
operating, the initial thread trimming will not operate.
Caution
1. Manual thread trimming mode is very dangerous. Operate the machine after mastering the
thread trimming operation timing.
2. Check the OFF-status condition of a power switch before adjusting the thread trimming
device.
Warning
(1) Manual thread trimming mode by the knee switch
①
Pedals in the neutral position before sewing
②
Pedals in the neutral position during sewing
③
Pedals in the neutral position after sewing
Function
Default value
Extent
Unit
No.
Parameter
Group A
Cutting Device Motion Time
Setting Cutting Mode
Setting Cutting Range
Initial Cutting Stitch No
Initial Cutting Speed
Final Cutting Stitch No
Initial Cutting Speed
48[ms]
3
0
10[stitch]
1000[spm]
20[stitch]
1000[spm]
4~1020
0~3
0~2
0~255
20~3800
0~255
20~3800
48[ms]
Refer to
“
5) Thread
trimming mode setting
”
Refer to
“
6) Thread
trimming range setting
”
1[stitch]
20[stitch]
1[stitch]
20[stitch]
13
37
38
41
42
48
49
Group A
No.37
0
1
2
3
Manual Cutting Mode by knee switch
Auto Cutting Mode 1
Auto Cutting Mode 2
Auto Cutting Mode 3
Auto mode impossible
Parameter
Value
Function
Remark