SunStar KM-1060BL, User Manual

Page: 14 / 40

14
Check for the machine stop position after moving the needle
up and down by pushing the reverse button
① . See if the sign
“ B ” is shown on the window ② of the belt cover when the
needle stops in an up position. If not, adjust the position of the
magnetic holder embedded in the pulley, for trimming
function can be adversely affected when the position is not
adequate.
10) Check for stop position of the sewing
machine (thread trimming type)
D. Oil window check
After applying oil to each friction parts, turn on the main
switch and operate the machine at a low speed for five
minutes to check the oil flow in the oil hose passing the oil
window. The oil flow can be checked after about one
minute of machine operation. To ensure the machine is
maintained in an excellent condition, run the machine at
2,000 spm/minute for the first 4~5 days and at a normal
speed afterwards.
[ Fig. 14 ]
[ Fig. 15 ]
①
②
C. Hook part
Open the slide plate (right)
①
to add the sewing machine
oil into an arrow-pointed position. Close the slide plate
①
after oiling.
[ Fig. 13 ]
①