2
1. Fixation insallation area
2. Wired Interface: Z1 Z2 GND: Wired zone. AMP+ AMP-: Wired siren.
3. Microphone area
4. Switch for Spare battery
5. Wired siren.
6. Protection switch(Pressing for 10 seconds)
7. DC IN
8. Speaker
Chapter3.Initialization
Correct initiation of the main panel is important to its normal working and lifespan.
1. Connect the wired accessories that you need.
2. Insert SIM card.
3. Installing 12v power, main engine comes to self inspecting status. check the SIM card and
information signal on the screen in 15 seconds .The SIM card icon show “X” when the SIM
card is in abnormal status. Need to re-start if the SIM card status and information signal is
abnormal.
4. Turn on the battery switch.
5. Check the GSM signal icon on the LCD screen. Signal less than 3 lattice will affect the normal
performance. Please put the main panel at the place with good GSM signal.
Chapter4. System Settings
1. Enter settings
All the settings have to be done in setting status. Press 2/8/4/6 to turn up/down/left/right.
Enter setting status: in the state of disarm, input 6-digit password (system default: 888888), and
then press “ok”, the screen shows remote controller setting.
Fig1: disarm status
Fig2: please enter password
Fig3: press “ok” to set
