4
1
4
2
5
3
6
Determine the location of the
ventilation in- and outlet and
create an air vent hole in the
wall with dimensions Ø100 mm.
Be aware of the orientation of
the one-way air valve! The air
inlet is at the bottom of the
Sunshower, the air outlet at the
top. Skip this step when the air
inlet is situated in a dry room.
Apply a line of kit on the
indicated edges of the glass
panel holder.
Place the glass panel holder in
the air vent hole (including the
one-way air valve if necessary).
Attach the front glass panel to
the glass panel holder using the
magnets.
Your Sunshower is ready for use!
INSTRUCTIES
INSTALLATION GUIDE AIR VENT COVER SQUARE | P992 REV E
INSTALLATION
IN SIX STEPS
1
2
3
4
5
6
