38
Restraint Cover
WARNING:
Never remove harness buckle tongues or chest clip from
harness shoulder straps. This is dangerous and is NOT
necessary when removing and replacing restraint cover.
Removing restraint cover:
1. Unthread harness shoulder staps from back of restraint
(see
page 34, adjusting harness height)
.
2. Remove fasteners securing cover to inside of restraint bottom.
(Fig. 1-A)
3. Remove fasteners securing
cover to outside of restraint
bottom. (Fig. 1-B)
Grab edge of plastic fastener
with pliers. (Fig. 2)
Brace bottom of pliers on
plastic seat. (Fig. 2-A)
Press handles of pliers down-
ward (Fig. 3-B); fastener will
come upward. (Fig. 3-C)
4. Unhook fasteners securing
cover to front of restraint.
5. Carefully remove upper
portion of cover from restraint
taking care not to damage the
white EPS foam panels, and
then remove cover from
bottom portion of the restraint.
Replacing restraint cover:
To replace the cover, follow cover removal instructions in reverse
order. Make sure harness shoulder straps are threaded through
correct slots and that harness straps are not twisted.
(See page
34, for changing harness height.)
2
A
3
B
C
1
A
B
