SunSetter Products, a Massachusetts Limited Partnership, 184 Charles Street, Malden, MA 02148
July
2
9
,
2019
INS065-
Cover_OASIS.pdf
Figure 8
Figure 6
Grommet
Cord Loop
Figure 7
Safety
Clip
Cord
Lock
Figure 9
Installation and First Use of
Breakaway
Safety Clips
Detaching
Breakaway
Safety Clips
1.
Verify Awning is closed and
unplugged.
2. Position yourself under the Awning
and detach each Safety Clip, one at a
time.
3.
DO NOT REMOVE
the Cord Locks
from the Cover.
4. Plug in the electrical cord to use the
Awning.
Figure 10
knot
SUDDEN IMPACT HAZARD
•
USE ONLY
provided
Breakaway Safety Clips
to fasten the Protective Cover around the Awning.
•
DO NOT USE
other tie-downs in addition to or instead of the provided Breakaway Safety Clips.
•
SECURE
the Breakaway Safety Clips as directed.
•
NEVER
place a ladder or stand in front and at the level of the Front Bar of the Awning.
Failure to follow these instructions can present risk of
DEATH
or
SERIOUS INJURY
from being struck by an
Awning suddenly opening while removing tie-downs.
WARNING
1.
Close the Oasis and unplug it from the electric outlet.
2.
The Cover will be installed on top of the Oasis when the
installation of the Safety Clip Tie-Downs is complete
.
3.
Remove the Protective Cover from its packaging. Orient the Cover
on a clean work surface, so that the sewn hem is facing down.
4.
Locate the
Breakaway
Safety Clips.
5.
Form a loop in the Cord and pass it through a Grommet.
See
Figure 6
. Pass the Cord with Safety Clip and Cord Lock through
the loop (
see Figure 7
) and pull it snug.
See Figure 8
.
6.
Repeat for each
Breakaway
Safety Clip
on one side of Cover
.
7.
Lay the Cover across the top of the fully closed Oasis, sewn hem
facing down.
8.
Attach the Safety Clip to the other side of the Cover, along the
hem by
each Grommet location, passing it underneath the Oasis
square bar.
See
Figure 9
.
9.
Cinch the Cord Lock to the desired snugness, then create a knot
using the
two cord ends so the knot is located approximately 1
inch from the Cord
Lock.
See Figure 10
.
10.
Trim the excess Cord close to the knot at each location.
See
Figure 10.
11.
Call
800-670-7071
for
Free
replacement
Cord Locks
if necessary.
Loop
