Parts Supplied
:
Safety Clip, Cord Lock, Gear, and Cord
(
Safety Clip Kit
)
7
S
afety
C
lip
K
its
each
for 12ft model, 9
S
afety
C
lip
K
its
each
for 16ft
model
.
See
Figure 1
.
©SunSetter Products, 184 Charles Street, Malden, MA 02148
RETRACTABLE AWNINGS
For Technical Support visit us at http://ownerscorner.sunsetter.com
or Call Toll Free 800-670-7071 • Fax 877-224-4944
Instructions for Use of
Breakaway
Safety Clips and
Oasis
Awning
Cover
* REQUIRED *
2.
3.
4.
Thread a Cord through one of the safet
y Clip handles. See
Figure 2
.
Slide the two ends of the Cord through the Cord Lock from the
smaller (flat edge) side to the larger (curved) side. (Do not pull the
entire Cord through
.
) See
Figure 3
.
Hold the Cord Lock in the center of the Cord and separate the two
ends of the Cord. See
Figure 4
.
Slide the Gear into the large (curved) side
of the Cord Lock
until the
Gear pops into place. Be sure that the part of the Gear that
protrudes is aligned with the slot in the Cord Lock. See
Figure 5
.
5.
Repeat with remaining Safety Clips, Cords, Gears, and Cord
Locks.
Figure 3
Cord through Cord Lock
Figure 4
Cord Lock
Ends of
Cord
Figure 5
Gear in
Cord Lock
Cord Lock
Safety Clip
Gear
(White or Black)
Cord
Figure 1 - Parts Supplied
(Safety Clip Kit)
Figure 2
Cord through Clip Handle
SUDDEN IMPACT HAZARD
•
USE ONLY
provided
Breakaway Safety Clips
to fasten the Protective Cover around the Awning.
•
DO NOT USE
other tie-downs in addition to or instead of the provided Breakaway Safety Clips.
•
S
ECURE
the Breakaway Safety Clips as directed.
•
NEVER
place a ladder or stand in front and at the level of the Front Bar of the Awning.
Failure to follow these instructions can present risk of
DEATH
or
SERIOUS INJURY
from being struck by an
Awning suddenly opening while removing tie-downs.
WARNING
Gear
(White or Black)
1
.
Assembly of Breakaway Safety Clips
