Sunrise MORTAR GUN 3000, Operator'S Manual

Page: 7 / 16

Slide Auger Barrel (#901)
into Hopper Body. (#908)
Firmly seat Barrel (#901) so that the back of the Barrel
Protrudes out of the Hopper Body (#908) as shown.
Secure Barrel into
place with 2
screws (#701S)
Push Cam-Coupling on to the Auger shaft so that
the Cam-Roller just touches the Roller stop.
Cam-Roller (#514)
Push Nozzle holder on until
the Allen Key (#506) easily slides
into locking hole.
Align Set Screws and then tighten when the
Cam-Coupling is in proper position (#703-S & 502-S)
Roller-Stop
Position the Cam-Roller with the Cam -Coupling (#703)
as shown. Push the Vibrator rod (#707) down so that
the Cam-Roller will slip on to the Vibrator-Rod
as the Cam-Coupling is pushed on to the Auger shaft.
Slide Auger-assembly into barrel until foward set screw in
Blade-Coupling (#502) is about 1/8th inch from end of Barrel
Blade-Coupling
Arm removed
for demonstration
1.
2.
3.
4.
5.
6.
7.
8.
of Auger Barrel , Hopper Body , Auger,Cam-Roller and Cam Coupling
Assembly
5.
Put steel nozzle(# 551,552,553,552-A)followed by
Retainer collar (#751) into Nozzle-Holder (#750)
then push assembly on to Barrel .