Service instructions
6 Service instructions
6.1
Maintenance diagram
Every year or every 1000 km the following parts must be checked or replaced:
•
Battery
•
Lights
•
Fuses
•
Tyres
•
Transaxle
•
Carbon brushes
6.2
Maintenance instructions
•
Check condition of the battery/leakage
•
Check lights
•
Check fuses
•
Check tyres (wear and tension)
•
Check Transaxle (free wheel lever, leakage etc.)
•
Replace carbon brushes
•
Lubrication (seat post and slider)
6.3
Instructions for repair
Make sure that the scooter is disconnected from the batteries before executing any repair work.
When replacing the transaxle, always reset the current free wheel lever.
(De-)activating of audible signal for indicator, alarm and reverse-beep.
These dip-switches are located at the botom-side of the Tiller PCB (004-2). First remove the shroud front assy
(005-4) and the shroud rear assy (005-5) by unscrewing the 4x cross-head screws. Now you’ve acces to the 4
cross-head screws of the top console assy (004).
No signal
Only indicators and alarm signal (when contact is switched on)
Only reverse beep
All audible signals are activated (when contact is switched on)
ON
1 2
ON
1 2
ON
1 2
ON
1 2
18
Version 2016v1
