background image

247556 Rev. B

3

Quickie

®

 Q700-UP M Seating Manual

II. TABLE OF CONTENTS

I.  

INTRODUCTION .......................................................................................2

II.  

TABLE OF CONTENTS ............................................................................3

1.0 

USER INFORMATION ...............................................................................4

 

1.1   This user manual ................................................................................4

 

1.2   For further information ..................................................................4

 

1.3   Symbols used in this manual .........................................................4

2.0 

SAFETY .............................................................................................................5

 

2.1   Symbols and labels used on the product ................................5

 

2.2   Safety: Temperature .........................................................................5

 

2.3   Safety: Moving parts .........................................................................5

 

2.4   Safety: Choking hazard ...................................................................5

 

2.5   Safety: General warnings ................................................................6

 

2.6   Safety: Accessory trays ...................................................................6

 

2.7   Safety: Stability....................................................................................6

3.0 

GENERAL DESCRIPTION

 

3.1   Maximum user weight .....................................................................7

4.0 

WARNINGS FOR COMPONENTS AND OPTIONS ................8

 

4.1   Armrests ...............................................................................................8

 

4.2   Cushions................................................................................................8

 

4.3   Fasteners ...............................................................................................8

 

4.4   Footplate and footrests ..................................................................8

 

4.5   Positioning belts .................................................................................8

 

4.6   Push handles ........................................................................................8

 

4.7  Seating systems ..................................................................................8

 

4.8  Upholstery fabric ...............................................................................8

 

4.9  Wiring and connectors ...................................................................8

 

4.10  Assignable controls ...........................................................................8

 

4.11  Power seating safety ........................................................................9

 

4.12  Power recline ......................................................................................9

 

4.13  Power leg rest .....................................................................................9

 

4.14  Double tilt module ...........................................................................9

 

4.15  Swing away joystick arm .................................................................9

 

4.16  Motor locks .........................................................................................9

 

4.17  On/Off  switch .....................................................................................9

 

4.18  Motor and suspension springs .....................................................9

 

4.19  Standing position ...............................................................................10

 

4.20  Transit .....................................................................................................10

5.0 

SETTING UP THE WHEELCHAIR ......................................................11

 

5.1  Seating system ....................................................................................11

 

5.2  Seat height ............................................................................................11

 

5.3  Set seat depth .....................................................................................11

 

5.4  Control system program ...............................................................11

 

5.5  Set armrest width .............................................................................12

 

5.6  Pre-set reclining fl ip back armrest .............................................12

 

5.7  Set leg rests and footplates ...........................................................13

 

5.8  Pre-set headrest.................................................................................14

 

5.9  Pre-set fi xed / swing away controller .......................................15

 

5.10  Check after setup and/or adjustment of wheelchair .........15

6.0 

SEATING POSITIONING ACCESSORIES ........................................16

 

6.1  Lap strap / seating positioning belt ............................................16

 
7.0 

USING THE SEATING SYSTEM ............................................................17

 

7.1  Making a transfer ...............................................................................17

 

7.2  Curves ....................................................................................................18

 

7.3   Breaking and Emergency stop .....................................................18

 

7.4   Driving on a slope .............................................................................18

 

7.5   Powered seating options ................................................................19

 

7.6  Electric standing function ..............................................................20

 

7.7  Seat memory position .....................................................................20

 

7.8  Standing function ...............................................................................22

 
8.0 

MAINTENANCE AND CLEANING ...................................................24

 

8.1   General maintenance .......................................................................24

 

8.2   Cleaning your seating system .......................................................25

 

8.3   Hygiene measures when being re-used ...................................25

 

8.4   General cleaning instructions .......................................................25

 

8.5  Cleaning accessories ........................................................................25

 

8.6   Medium to long term storage .....................................................25

 

8.7  Maintenance and inspection schedule ......................................26

9.0 

TECHNICAL SPECIFICATIONS: APPLICABLE NORMS /

 

STANDARDS .................................................................................................26

10.0  SUNRISE LIMITED WARRANTY .........................................................27

Summary of Contents for Quickie Q700-UP M





























Reviews: