Quickie
®
Q700-UP M Seating Manual
247556 Rev. B
12
5.0 SETTING UP THE WHEELCHAIR
5.5 Set armrest width
Set the armrest width
1.
Remove the two screws (A) using 5mm Allen key (included with chair) on the traversing tube as shown
(Fig. 5.4)
2.
Move the armrest receiver brackets to the desired position.
3.
Attach the screws (A) fi rmly prior to use.
5.6 Pr
e-set reclining fl ip back armrest
Armrest height
Fine or gross adjustment, it is a two-part process:
Part 1 (Fig. 5.5)
4.
Loosen (A) in order to adjust (B).
Part 2 (Fig. 5.6)
5.
Loosen (A) in order to adjust (B).
6.
Retighten screws (A-Fig. 5.4 and A-Fig.5.5). See section 8 for specifi ed torque values.
Armrest pad depth (Fig. 5.7)
1.
Loosen both screws (A) by one turn.
2.
Adjust (B) to the desired position.
3.
Tighten (A). See section 8 for specifi ed torque values.
Armrest width adjustment (Fig. 5.8 and 5.9)
1.
Using 8mm hex tool, for M10 to loosen both screws (A) by one turn.
2.
Adjust (B) in or out to the desired position.
3.
Tighten (A) to 45-55 Nm [398-486 in-lbs].
WARNING!
All screws should be checked periodically for tightness. A loose arm pad could slip down when pressed. See
maintenance schedule in Section 8.
Fig.5.4
A
Fig.5.8
A
B
Fig.5.9
B
B
Fig.5.5
B
A
Fig.5.6
A
B
Fig.5.7
A
B
