30
EN
GLISH
Q700 M/M HD/F/R/UP-M/UP-F Rev.G
Fig. 7.17
Fig. 7.18
Fig. 7.19
Fig. 7.20
Fitting the dahl lock plate
Required tools:
•
Torx bit T27
•
Torque wrench (16-18Nm)
•
Angle grinder
• Marker
Parts list:
•
501798 Adaptation kit
•
500561 Lock plate with bolts
•
500673 8mm spacer
Instructions
a.
Mount the five screws together with the spacer and lock plate
on the underside of the battery box
b.
Mark excess screw length (Fig. 7.17)
c.
Remove the screws from the assembly and cut to length using
an angle grinder
d.
Apply loctite 222 onto the screw and tighten the assembly to
16-18Nm
e.
Level the battery compartment by positioning the two plastic
spacers on either side of the nuts
BOTTOM VIEW
TOP VIEW
Plastic spacer
Plastic spacer
Spacer
Nut
Lock plate
Summary of Contents for Quickie Q700 M
Page 150: ...150 Q700 M M HD F R UP M UP F Rev G ...
