932208 Rev. A
V I I I . S e t - U p , A d j u s t m e n t & U s e
31
V I I I . S e t - U p , A d j u s t m e n t & U s e
932208 Rev. A
30
9
2
6
7
1
4
3
5
8
Height-Adjustable Armrest Key
1. Inner Arm Post
2. Receiver
3. Release Lever, Locked Position
4. Armrest Pad
5. Transfer Bar
6. Side Panel
7. Tension Adjustment Set Screw
8. Outer Arm Post
9. Receiver Adjustment Bolts
H. DUAL-POST HEIGHT-ADJUSTABLE ARMRESTS
(OPTION) FIXED HEIGHT STANDARD
The dual-post flip-back armrest can be used as either a
flip-back armrest or a removable armrest.
1. Installing Armrest
a. Insert front and rear posts into armrest receivers.
b. Engage levers (A and B) to secure armrest.
2. Set-up for Flip-back Operation
a. Disengage lever (A) so front post is able to come
free.
b. Armrest now has the ability to be flipped back
without removal.
3. Set-up for Removal
a. Disengage levers (A and B) so front and rear
posts are able to come free.
b. Armrest can now be easily removed for transferring.
4. Height-Adjustment (option)
a. Release the upper securing lever (C).
b. Set at desired height
c. Return securing lever to locked position.
d. Move armrest up or down to allow armrest to
snap into place
I. SINGLE POST HEIGHT-ADJUSTABLE ARMRESTS
(OPTIONAL)
1. Installation
a. Slide the outer armpost into the receiver mount-
ed to the wheel chair frame.
b. The armrest will automatically lock into place.
2. Height Adjustment
a. Rotate release lever to stop.
b. Slide armrest pad up or down to desired height.
c. Return lever to locked position.
d. Push arm pad until upper armpost locks firmly
into place.
3. Removing Armrest
a. Rotate release lever and remove the armrest.
4. Replacing Armrest
a. Slide armrest back into receiver.
b. Return release lever to locked
position against armpost.
A
B
C
E. JOYSTICK
1. To Connect
a. Line up the groove on the joystick cable (A) with
the groove on the wing of the wheelchair cable
(B).
b. Push the connectors together and then turn the
wing of the wheelchair cable until the two wings
line up (C).
2. To Disconnect
a. Turn the wing (D) so that both the groove on
the wing of the wheelchair cable and the groove
on the joystick cable line up.
b. Pull apart the two connectors.
F. TO ADJUST THE HEIGHT OF THE JOYSTICK
1. Loosen the two Socket Head screws (E).
2. Slide the joystick clamp (F) up or down until in
desired position.
3. Retighten the two Socket Head Screws (E).
G. JOYSTICK SWING-AWAY RETRACTABLE MOUNT
(OPTIONAL)
The joystick is mounted with a mechanism which
allows the control to be locked in a forward or retract-
ed position using magnets.
Adjustment
a. To retract joystick, push outward on the inside of
joystick.
b. Push joystick away from front of armrest until it
locks into retracted position.
c. To return to forward position, push joystick
forward until it locks into place.
A
B
C
D
E
F
