background image

Zippie 

®

 SPHYNX

252843 Rev. B

2

1.0 INTRODUCTION

SUNRISE MEDICAL

®

 LISTENS

Thank you for choosing the Zippie

®

 Sphynx wheelchair. We want to hear your 

questions or comments about this manual, the safety and reliability of your chair, 
and the service you receive from your Authorized Sunrise Medical Dealer. Please 
feel free to write or call us at the address and telephone number below:

SUNRISE MEDICAL (US) LLC

Customer Service Department

2842 N. Business Park Avenue

Fresno, CA 93727 USA

(800) 333-4000

Be sure to register your wheelchair and let us know if you change your address. 
This will allow us to keep you up to date with information about safety, new 
products, and options to increase your use and enjoyment of this wheelchair. If 
you lose your warranty card, call or write and we will gladly send you a new one.

You can also register your wheelchair at:
www.sunrisemedical.com/register

FOR ANSWERS TO YOUR QUESTIONS
Your authorized dealer knows your wheelchair best, and can answer most of your 
questions about chair safety, use and maintenance.

For future reference, please fi ll in the following:

Dealer: ______________________________________________________

Address: _____________________________________________________

Telephone: __________________________________________________

Serial #: ____________________ Date/Purchased: _______________

ADDITIONAL INFORMATION YOU SHOULD KNOW

No component of this chair was made with Natural Rubber Latex.

www.sunrisemedical.com/register

                    DISPOSAL AND RECYCLING INFORMATION

                          When this product reaches the end of its life, please take it to an  

 

 

 

approved collection or recycling point designated by your local or state   

 

 

government. This  product is manufactured using a variety of materials. 

Your product should not be disposed of as ordinary household waste. You should dispose 
of your product properly, according to local laws and regulations. Most materials that are 
used in the construction of this product are fully recyclable. The separate collection and 
recycling of your product at the time of disposal will help conserve natural resources and 
ensure that it is disposed in a manner that protects the environment.

Ensure you are the legal owner of the product prior to arranging for the product disposal 
in accordance with the above recommendations.

Summary of Contents for E1161





























Reviews: