Zippie
®
SPHYNX
252843 Rev. B
17
8.0 USE AND MAINTENANCE
N. FOLDING AND UNFOLDING
1.
Unfolding the chair:
a.
With the chair on the ground, pull the backrest up by the stroller handles until you hear the
audible click and the backrest clicks into the fi rst recline position of 85°.
b.
Ensure that the front pivot of the tilt link is in the locked position indicated on each side of the
chair. Check that chair is in 85° recline. (Fig 8.17)
WARNING
Ensure that the front slide is in its fully locked position by checking that the locked position mark on either
side of the seat frame is aligned with the pivot point of the front slide. Always perform this check after using
the latch handle and before returning the chair to use. (Fig 8.17)
WARNING
Check that backrest pin is fully engaged on both sides of chair. (Fig 8.20)
2.
Folding the chair:
a.
Pull both latch handles all the way up by shifting the handles past the recline stop tab (Fig 8.18).
While holding the handles in this position, push the backrest until the chair begins to fold.
b.
You can now release the latch handles while continuing to fold until the backrest bottoms out
on the seat.
c.
Secure strap to keep chair in folded position. (Fig 8.19)
WARNING
Be careful not to get your fi ngers caught in the cross-tube assembly during folding and unfolding.
8.19
8.18
8.20
INCORRECT:
gap = not fully engaged
CORRECT:
no gap = fully engaged
Strap
8.17
8.18
8.19
8.20
8.17
In lock position
Recline angle settings
Recline
Stop
Tab
