Sunrise Medical Diamond, Owner'S Manual

Page: 19 / 40

16 Iss 1
Seat Adjustment
To adjust seat height, remove the seat and rear body panel as previously described.
1. Loosen the seat securing hex head bolt, (Photo 16).
2. Hold the top of the seat post and remove the seat post pin, (Photo 17).
3. Move the seat post to the new position and refit the seat pin, (Photo 17).
4. Tighten the seat post securing hex head bolt, (Photo 16).
5. Refit panel and seat.
To adjust seat distance from tiller.
1. Lift the seat slide lever found at the lower front right of the seat, (Photo 18).
2. Gently push / pull with your legs to move seat until it clicks securely into the
desired position, (Photo 19).
Use of mobile phones
Mobile telephones or two way radio
devices must not be used while
operating the vehicle.
Use of mobile phones or two way radios
can cause excessively strong
electromagnetic fields. This may
interfere with the vehicle’s electronic
systems.
If mobile phones or mobile radios are
required to be used, the vehicle must be
brought to a halt and the power turned
off before any such device is switched
on or used.
If you are in any doubt about your
ability to drive the scooter due to
any medical condition or
treatment, then consult your
doctor.
Safety warning and user guidance
Transportation
When transporting the scooter remove the
seat, front basket and lower the tiller,
(Photo 15).
Always stow your scooter in the luggage
compartment of your vehicle.
Always ensure your scooter or scooter
parts are securely anchored when being
transported.
Do not sit on your scooter whilst it is being
transported in or on another vehicle.
Do not attempt to carry passengers on
your scooter.
Do not attempt to tow another vehicle.
Photo 15
Photo 18 Photo 16 Photo 17 Photo 19