Sunrise Medical BREEZY 600 SERIES User Instruction Manual & Warranty Download

Page: 42 / 44

930300 Rev. E

B. MAINTENANCE
1. Axles & Axle Sleeves:

Check axles and axle sleeves every six months to make sure they are tight.

Loose sleeves will damage the axle plate and will affect performance.

2. Tire Air Pressure:

Check air pressure in pneumatic tires at least ONCE A WEEK. The wheel

locks will not grip properly if you fail to maintain the air pressure shown
on tire sidewall.

D. CLEANING

1. Paint Finish

a. Clean the paint finish with mild soap at least once a month.
b. Protect the paint with a coat of non-abrasive auto wax every three

months.

2. Axles and Moving Parts

a. Clean around axles and moving parts WEEKLY with a slightly damp

(not wet) cloth.

b. Wipe off or blow away any fluff, dust, or dirt on axles or moving parts.

Note: You do not need to grease or oil the chair.

3. Upholstery

a. Hand-wash (machine washing may damage fabric).
b. Drip-dry only. DO NOT machine dry as heat will damage fabric.

E. STORAGE TIPS

1. Store your chair in a clean, dry area. If you fail to do so, parts may rust

or corrode.

2. Before using your chair, make sure it is in proper working order. Inspect

and service all items on the "Maintenance Chart." (See p. 45)

3. If stored for more than three months, have your chair inspected by an

authorized supplier before use.

X I I . M A I N T E N A N C E

Summary of Contents for BREEZY 600 SERIES













































Search results

Summary of Contents for BREEZY 600 SERIES

Reviews:

Related manuals for BREEZY 600 SERIES

Brands by name

Popular brands

Sunrise Medical BREEZY 600 SERIES, User Instruction Manual & Warranty

Search results

Summary of Contents for BREEZY 600 SERIES

Reviews:

Related manuals for BREEZY 600 SERIES

Brands by name

Popular brands