Nov/06
MN6000000014
7
Connecting the Enclosure Kit to a Computer
Complete the following steps to connect the enclosure to a host
computer.
1.
Connect the AC/DC power adapter, then turn on the power switch;
ensure that the blue LED indicator is active.
2.
Insert the USB connector into the corresponding port.
3.
Insert the USB connector into an available port on the computer.
Software Installation
Windows® ME/2000/XP and Macintosh
Just insert the USB interface cable into computer, the hard disk will be
recognized automatically.
Windows® 98/98SE
Windows® 98/98SE users must install the appropriate USB storage
driver by completing the following:
1.
Boot-up computer into Windows. Don’t plug in the USB interface
cable of the 3.5’’ HDD Enclosure to the USB connector of your
computer.
2.
Please insert the CD driver bound with 3.5’’ HDD Enclosure into
your CD-ROM Drive.
